The HiViz WorkShop
DU. Electronic Delay Kit, Unassembled
 |
| Click on the photo to enlarge |
This kit includes parts for a delay circuit that can be used with our sound, photogate, or light-activated triggers or simply with the closure of an electrical contact to synchronize the discharge of a flash unit with the event to be photographed. Delays are adjustable from about 0.0002 - 0.5 seconds. There is both coarse and fine control of the delay interval. A red LED flashes when the circuit triggers.
The kit includes three feet of 2-conductor cable for splicing the output to a PC cord or Flash-to-PC adapter. The latter two items are not provided with the kit but can be purchased separately. See the Product Guide for various connection options. In order to trigger a camera, see the Camera Opto-Switch or this DIY method.
A 9-V battery or 9-V AC/DC Adapter is required to power the circuit.
If you're also purchasing a photogate (SPG1, SPG2, or TPG), sound trigger (SK2), or light-activated trigger (LAT) kit , you'll receive a discount of $1.00 by purchasing the trigger kit in combination with the delay unit. In that case, click on one of the links below:
Schmitt photogate-delay unit package
Transistor photogate-delay unit package
Sound trigger-delay unit package
Light-activated trigger-delay unit
package
Purchase this kit assembled.
Click here for more information
or below to order.
