The HiViz.com WorkShop
|For secure access to the online store, click here.|
Cables, Connectors, Adapters
A flash trigger cable is required to trigger a flash unit from either a breadboard circuit or a project enclosure. We have kits as well as assembled cables for both.
A shutter cable is required to actuate a camera shutter. For some circuits--such as our breadboard circuits--a Camera Opto-Switch is also required in order to isolate your camera electrically from the trigger circuitry.
See this chart for information on the cable requirements for our kits.
We also have plain cable and hook up wire for your project needs as well as a variety of standard connectors and adapters that are compatible with our enclosure kits.
|Flash trigger cable kits||Shutter cables||Cable and wire|