While the Multi-Trigger 2 has been superceded by the Multi-Trigger 3, the following accessories for the Multi-Trigger 2 are still available.
Output extender kit
This accessory kit for the Multi-Trigger 2 includes additional components for the PC board and a strip of 4 RCA jacks in order to install switch outputs for high-voltage flash units and low-voltage outputs to control devices such as LEDs and low-current relays. A template is provided for marking the placement of holes to drill in the project box.
An assembled Multi-Trigger 2 control box with an output extender strip is shown to the right. The extender kit provides the following:
instant and delayed switch outputs for high-voltage flash
low-voltage (7.5 V) pulse outputs that can be used to actuate flash units requiring a trigger pulse. These outputs can also actuate LEDs, low-current relays, and other devices.
This AC/DC wall adapter provides a substitute for a 9V battery
to power many of your HiViz.com circuits. The adapter accepts 100-240V input
voltage at 50-60 Hz; output is a regulated 9 VDC.
The power rating is 10 W. The AC plug is a standard 2-pin non-polarized US plug. An adapter may be needed for some countries.