HiViz - Kits - Flash-to-PC Adapter

The HiViz WorkShop

PC-A. PC Cord Adapter, assembled

We'll prepare a cord that you can connect directly from the output of one of our trigger circuits to the PC jack of your flash unit. The cord will fit standard PC jacks such as the one shown to the right. Click on the photo for a larger view..

Flash unit with PC jack above

The photo to the right shows the end of the PC cord that plugs into the flash unit. We'll splice this to three feet of 2-conductor cable for connection to the output of your trigger circuit

Click here or on the photo to see views of the complete cable.

PC plug below

PC. PC Cord Adapter, unassembled

If you prefer to do your own splicing of the PC plug to a 2-conductor cable that you already have, we'll send you what amounts to half of a standard PC cord shown to the right. One end will be the PC plug end shown above and the other will be just the cut end of the cord. (total length about 6") This is significantly less expensive than buying a complete PC cord at a photo store. We'll also include lengths of heat-shrink tubing that you can use in following the assembly instructions here. You will need to supply the length of 2-conductor cable from your trigger kit.