information and inspiration
for students, teachers and hobbyists
About Tools Products Activities Galleries Projects Links Contact Facebook LinkedIn  flickr

 

The HiViz.com WorkShop

 

 

 

Flash Trigger Cable Kit (for RCA jacks)

 

Flash Trigger Cable Kit (RCA type)

Hot shoe adapterThis kit is for preparing a cable to connect the flash output of a trigger to a PC jack. The kit includes a PC-type connector for the flash, an RCA plug, 3-ft of 2-conductor cable, and heat-shrink tubing. Assembly is required. If your flash unit doesn't have a PC jack but does have a hot shoe, the hot shoe adapter shown to the right can be used together with a flash trigger cable for flash triggering.

 

If your flash unit is one of the Vivitar models 283, 285HV, or 3700, you'll need a Vivitar PC-1 cord to connect to your flash unit. Click here for one possible source. If you're triggering your flash wirelessly or your flash unit has a 3.5mm synch jack, see this page for 3.5mm cables.

PC flash trigger cable kit with RCA plug RCA flash trigger cable, assembled

PC cable kit with RCA plug,

unassembled - $4.95

PC flash trigger cable,

assembled

 

Select a flash cable kit $4.95), a hot shoe adapter ($9.95), or a combination of flash cable kit ($13.90). The latter combination saves you $1 over purchasing the items separately.

Select option

 


About Tools Products Activities Galleries Projects Links Contact Facebook LinkedIn flickr
 
 
copyright © 1995-2020 HiViz.com